Prasad Chambers, 817, Maharashtra 400004 Phone: +91-9136470619

MONEL 400/500 WASHER

MONEL 400/500 WASHER:

post-4

DC is the manufacturer and producer of Monel 400/500 washers all across the world. We offer quality raw materials from verified dealers only and are known as the best company for Monel fasteners. Get in touch to learn more about us.

DC design Monel k400 and K500 washers according to all national and international or global standards, and different bars and custom-made specifications are also available to us. Even the non-standard shapes, sizes, and dimensions are also provided to our clients.

Monel 400 is a conventional grade of Monel K500, which is nickel-copper alloy fasteners and precipitation-hardenable alloy grade in the market. Both Monel 400 and K500 washers have excellent corrosion resistance and the benefit of good toughness and strength by adding aluminum. There are some reliable properties of Monel K500 washers, such as good strength, high toughness, and fracture toughness, all thanks to the two most standard elements as Titanium and aluminum.

MONEL 400/500 WASHERS Specification

            Specifications             DIN, ISO ,JIS ,GB, IS, BS, ASTM
           Standard            ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
           Size             M0.2 to M33 | 3/6" to 2" | Custom Sizes
           Length            3 mm to 200 mm | Custom Sizes
           Dimensions            DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
           Form            Hex, Threading, Square, Round as per Gauge Etc.
           Threads            Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or
           vertically
            Threads available            UNF, BSW, BSF, METRIC, UNC, or as required
           Threads
         Configuration		            ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
           Certification            Dual Certified As per ASTM & ASME Codes
           Test Certificate            As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD             2000 W2 Certified
           Raw materials            Source            JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc.
           Packing            IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
            Surface Coating            Cadmium Coating
           Hot Dipped Galvanizing Coating
            Ptfe Coated Nickel Alloy 200 Fasteners
           Phosphate Coating
           Teflon Coating
           Xylon Coating
           Zinc Coating

Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe
Monel K500 2.4375 N05500 - - - - -

Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Mechanical Properties

Grade
Density
Tensile Strength
Elongation
(% in 50mm)
Yield Strength
(0.2%Offset)
Melting Point
Monel 400
8.8 g/cm3
Psi – 80,000 , MPa – 550
40 %
Psi – 35,000 , MPa – 240
1350 °C (2460 °F)
Monel K500
8.44 g/cm3
Psi – 160000 , MPa – 1100
20 %
Psi – 115000 , MPa – 790
1350 °C (2460 °F)

Footer

About Us

DC Engineering Products LLP has steadily grown into a leading specialist in the manufacture and distributor of industrial fasteners, as per standards ASTM, A5ME, DIN and UNI.

Contact

  • Phone: +91-9136470619
  • Email: [email protected]
  • Adress: Prasad Chambers, 817, 8 Th Floor, Near, Tata Rd No 2, Opera House, Mumbai, Maharashtra 400004

Products

EXTRA NAVIGATION